Jaw 4-1/2" long , Base 8" long , Width 1"

The Small Parts Vise is perfect for holding tiny parts for sanding . With it, nuts and saddles are a snap for the luthier. Stock can be mounted on either side of the vise then pushed through the thickness sander. The long base allows for a safe and easy feed and holds the stock perfectly perpendicular to the sanding drum.
One jaw is 1/4" deep, the other 1/2" deep, allowing for accurate indexing . Also shims may be cut to position parts accurately .
The small parts vise is available as an accessory to the Luthier's Friend™